Sheet-Plate
We supply a wide range of precisely engineered stainless steel pipes & tubes, made in compliance with international quality and safety standards. Our range comprises of stainless steel welded pipes & tubes. Available in different dimensions & grades, these stainless steel welded tubes and pipes are widely used in different industries like power, engineering, construction and many more. We offer products at highly competitive prices and deliver consignment within stipulated time.
Sheets-Plates
|
Stainless Steel
|
ASTM A479, A182 - 304, 304L, 304H, 316, 316L, 316H, 316Ti, 309, 310, 317L, 321, 347, 904L, 17-4PH & 400 Series |
|---|---|
|
Mild Steel
|
Gr. 1008, 1010, 1015, 1020, CK35, CK45, CK55, CK60 Etc. |
|
Carbon Steel
|
ASTM A105, A350 LF2 |
|
Alloy Steel
|
ASTM A182 F5, F9, F11, F12, F21, F22, F91 |
|
High Nickel Alloys
|
Hastelloy, Nickel, Monel, Inconel, Incoloy, Alloy-20 & Cupro Nickel |
|
Non Ferrous
|
Copper |
Steel Sheets
We offer wide variety of industrial steel sheets, which are fabricated from finest quality of raw materials. Manufactured as per the international quality and safety standards, we offer these products in different dimensions and at highly competitive prices. These products are mostly applied in construction and engineering industry.
| Range | 0.1 mm to 100 mm |
| Thickness | 0.3 - 120 mm |
| Finish | Polished |
| Technique | Cold Rolled |
Steel Plate
Welcome Oversease is included in Manufacturing and Exporting of astounding sheets, plates, coil in that have discovered broad applications in different commercial ventures.
| Surface Treatment | All surface treatments |
| Material Grade | 200 series, 300 series and all standard grades |
| Type | Both plate and coil types |
| Finish | Hairline Finish |
| Thickness | 0.4 mm - 6.0 mm |
| Coating | PVC coating normal/laser |
| Width | 1000mm, 1250mm, 1500mm, 2000mm |
Perforation Sheet
Product Specification
|
Stainless Steel
|
ASTM A479, A182 -202,303,304, 304L, 304H, 316, 316L, 316Ti,309, 310, 310S, 321, 321H, 317, 347, 347H, 904L |
|---|---|
|
Duplex & Super Duplex
|
F 44, F 45, F51, F 53, F 55, F 60, F 61 |
|
Carbon Steel
|
ASTM A105, A350 LF2, A106 Gr A, B, C, A333 Gr 6, 3 |
|
Alloy Steel
|
ASTM A182 F5, F9, F11, F12, F21, F22, F91, A335 Gr P1, P11, P12, P5, P9 |
|
Nickel Alloys
|
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020) |
|
Copper Alloy Steel
|
C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200 |
Round Hole Perforated Sheet
The Round Hole Perforated Sheet is the most popular perforated sheet pattern used in the present times. These perforated sheets are economical, versatile and have a strong aesthetic appeal. They are Light weight and offers Rust resistance. It also provides ventilation of air, light, sound and gases. The Round Hole Perforated Sheet is put to a wide variety of usages like cladding and ceiling panels, sunshades and sunscreens, decorative banister, balcony panels and more.
Oblong Hole Perforated Sheet
The Oblong Hole Perforated Sheet is widely used in the present times in the rice mills and sugar mills. It is the best solution, when filtering or separation of liquid and solid is required. These perforated sheets are manufactured using materials like stainless steel AISI 304-316,stainless steel, aluminium and any other material suitable for perforation. It is used in the sewage treatment plant for the safety grating, platform scaffoldings and more. The most important features of this pattern includes corrosion resistant, sturdiness, high tensile strength and the ability to withstand temperature variations.
Capsule Hole Perforated Sheet
With a strong commitment to the customer satisfaction, Jeetmull is engaged in the manufacturing of Capsule Hole Perforated Sheets using high grade material. These are put to use in various applications like Interior and Exterior designing, guards in the machines, ducting, wall and ceiling panels, air conditioning grills and more.
Rectangular Hole Perforated Sheet
The Rectangular Hole perforated Sheet is made with fine finishing, has dimensional accuracy and is corrosion resistant. This kind of Perforated Sheet is majorly used in water drainage shaft and in chemical processing, drying and storing the solid materials like tea, grains, maize and more. It is further used in environmental protection equipment, shelves, chemical machinery, pharmaceutical equipment, food and beverage machinery and more.
Hammer Mill Screen
The Hammer Mill Screens are manufactured using high quality carbon steel., and other high quality metal alloys using modern techniques. These screens are easy to be installed in the hammer mills owing to its perfect finish, corrosion resistance and impact proof nature. The Hammer Mill Screens are majorly used size and separate solid bulk products such as grains, powders and resins, fibres and filters.
Punch Plates
The Punched Plates are available in various shapes like round, square, hexagonal and elongated. They are majorly manufactured in mild steel and stainless steel. These Punch Plates offer longer screen life and excellent efficiency. With long service life and corrosion resistance, these Punch Plates are used as an outer body in the manufacturing of many things. Its used in various industries like mining, agriculture, architecture, dyeing, furniture, hammer mills and more.
Stainless Steel perforated Sheet
The Stainless Steel Perforated Sheet manufactured by the company is of high quality ensuring durability and the strength of the product. They are easy to install and have a low cost. With a beautiful appearance they are widely used in interior designing, noise control, building facades, ceilings, furnishings, In-Fill Panels and more. They are also used for dairy, beverages, food product handling and process equipment. They offer high corrosion resistance, weld and formability.
MS Perforated Sheet
We are the manufacturers of MS perforated Sheets in different size and thickness. These perforated sheets are used in a variety of fabrication works, machinery parts, filtration parts, agriculture industry, food industry and more. Easy to install, lightweight and economical the MS Perforated Sheet is highly in demand.
GI Perforated Sheet
The Galvanized Perforated Sheets are manufactured using stainless steel, low carbon sheets, copper and aluminium plates and more. With fine quality, light weight and sturdy construction, these GI Perforated Sheets are used for different industrial applications. Hey have a smooth and a defect free surface. They are made taking into account the dimensional accuracy. They have a rust prof finish with a wear and tear resistance.
Decorative Perforated Sheet
The Decorative Perforated Sheets are majorly used for the decoration purpose. This sheet has a series of punched decorative holes. The Decorative Perforated Sheets manufactured by the company comes in a variety of holes, gauges and materials in straight and staggered patterns. In addition for decorative purpose, these perforated sheets are used owing to its durability and light weight. They are the best materials to be used for architectural metal applications which require an aesthetic appeal. They are extremely versatile, economical, light weight and customizable. They are put to a variety of applications including vents, screens, diffusers, strainers and more.
Matt PVC Sheets
Transparent Matt PVC Sheets are Rigid PVC Sheets in clear colour but with fine matt finish on both sides. These sheets are manufactured in a calendering plant with 6 roller machine. There is only one standard size and thickness sold which is 0.20 mm x 915 mm x 915 mm.
Polyvinyl chloride (PVC) is a synthetic polymer of plastic available to produce rigid and flexible products. Mats made from this material provide cost-effective flooring options, especially in environments where rubber matting is not appropriate.
Polyvinyl chloride (PVC) is one of the most widely used plastics in the world. This industrial plastic is often used to make chemical storage tanks, oil tanks, and photographic developing instruments. If you would like to build a greenhouse or winterize your windows, look no further than our PVC sheet selection.
Dimple Sheet
Dimple sheets are produced with high-end technology using an inventive composite plastic polymer. This dimple sheet is used mainly as a protective layer over the waterproof, which also relieves the hydrostatic pressure by draining the water in the subsoil.
This dimple sheet membrane contributes to time and cost savings because of its lightweight construction and quick and simple installation without the need for heavy equipment. It is made up of a highly compression-resistant and flexible plastic dimple core, and it has a high tear, puncture, and chemically toxic water gas resistance. As a result, it helps extend the life of the waterproofing membrane in the foundation structure over which it is installed. It is specifically designed for use along with all kinds of waterproofing membrane systems as well as any torch-applied waterproofing membranes. It is an import substitute product manufactured ingeniously using high-tech, innovative technology.
Product Specification
- Thickness: Around 0.6 mm
- Dimple Height: 8 mm
- Width: 1.8 m
- Length: 20 m
- Wight around 600 gsm
- Material: Innovative Composite Plastic
Product Application
- Used mostly for retaining walls to shield the waterproofed surface from mechanical harm that could result from backfilling as well as from chemicals and harmful gases in the soil.
- Used as a protective layer over the waterproofing system during the construction of basement foundations and basement floors.
- Used as a layer of waterproofing protection in practically all underground structures.
- Dimple sheets are installed vertically or horizontally, laid and fixed directly over waterproofing membrane systems.
- Adjacent rolls can be bonded together by butt joints by overlapping at least 50mm using both side adhesive tapes.
- Utilized to release hydrostatic water pressure that has built up on the subsurface around the underground building structure.
- Used for water collection and drain management under planted podium decks, terrace-roof gardens, and deck-roof plazas.
- Used when subsoil hydrostatic drains are necessary, such as in basements, lift pits, retaining wall protection, tunnel surface drain liners, bridge abutments, and many more places.
Product benefits
- Fast, simple, and flexible installation that is light in weight.
- Protects watertight structures from subsurface toxic water, foul gases, and corrosive chemicals while being resistant to plant roots.
- Drains surplus water fast after removal and releases subsoil water pressure.
- live waterproofing protection with great durability.
- For a variety of depth applications, strong compressive strength offers high load-bearing capacity.
- Offers a waterproofing system defense against mechanical forces.
- High resilience to harsh conditions in naturally occurring groundwater, soil acids, and alkalis.
- Economical in comparison to other techniques like gravel filling for water drainage or gluing polystyrene foam to walls.
Aluminium Chequer Plate
The chequered plate is a very adaptable material with a variety of uses. The Aluminum Chequered Plates have superior shaping, are simple to drill, and are straightforward to weld. Aluminium and steel (carbon steel and stainless steel) are the most often used metals and alloys for the production of chequered plates.
Aluminium Tread (or Chequer) plate is used in decorative, architectural applications and shipbuilding. Being non-corrosive, it does not require painting, making if very low maintenance. This plate can be easily formed, is easy to drill and has generally good weldability.
What alloy is checker plate made from? In Australia, aluminium checker plate is most commonly stocked and sold in alloys 5052 and 3003. Alloy 5052 has good corrosion resistance and strength, and is sometimes referred to as “Marine Grade Aluminium”, and is used in the transport industry among many other applications.
Aluminium Checker Plate High-quality 5052 Alloy. This versatile and durable product comes in two sizes: 1200×2400×1.6mm and 1200×3000×3mm.
Stainless Steel Chequer Plate
The chequered plate is a very adaptable material with a variety of uses. The Aluminum Chequered Plates have superior shaping, are simple to drill, and are straightforward to weld. Aluminium and steel (carbon steel and stainless steel) are the most often used metals and alloys for the production of chequered plates.
Dimensions and standard weight table
| Size plate thickness | kg/m2 | 914 × 1,829 (three × six) |
1,219 × 2,438 (4 × 8) |
1,524 × 3,048 (5 × 10) |
|---|---|---|---|---|
| 2.3 | 19.73 | 33.0 | 58.6 | - |
| 3.2 | 26.79 | 44.8 | 79.6 | 125 |
| 4.5 | 36.99 | 61.8 | 110 | 172 |
| 6.0 | 48.77 | 81.5 | 145 | 227 |
| 9.0 | 72.32 | 121 | 215 | 336 |
| 12.0 | 95.87 | 160 | 285 | 445 |
| 16.0 | 127.3 | 213 | 378 | 591 |
| 19.0 | 150.9 | 252 | 448 | 701 |
| 22.0 | 174.4 | 292 | 518 | 810 |
Stainless steel embossed checker plate with thickness 1mm to 5mm can be used for insulated box manufacture.
Stainless steel sheets for the floor is a steel plate production floor experience and taking advantage of ordinary steel over the years, extensive know-how has been accumulated in the meantime, has been developed to respond to various requests from all walks of life. Stainless steel sheets for the floor to lead tomorrow of steel sheets for the floor, since there performance was backed by solid technology, we are confident that everyone surely to satisfy.
The shape and dimensions manufacturing:
| Thickness (mm) | 2.3 | 3.2 | 4.5 | 6.0 | 9.0 | 12.0 |
|---|---|---|---|---|---|---|
| Max width (mm) | 1219 | 1524 | 1524 | 1524 | 1524 | 1524 |
| Maximum length (mm) | 6096 | 6096 | 6096 | 6096 | 6096 | 6096 |
Wire Mesh
Wire mesh is commonly used in industrial applications when separation or filtration is needed; it is also popular for use in commercial applications, like insect screening or animal fencing.
Description: 5 mesh screen,one of popular woven wire mesh with mesh 5×5,wire diamater can be less than 1.04 mm(0.041inch),the aperture larger than 4.04 mm(0.159inch). The aperture will be larger when the wire diameter become more thin.
To determine the mesh, measure from the center of a wire to a point one inch distant, and count the number of openings. The diagram shows four openings in one inch. This diagram illustrates a 4 mesh wire. Mesh may also be expressed in inches, i.e.: wire 1/4” from center to center is a 1/4” mesh.
Wire mesh is Also known as wire fabric, wire cloth, or hardware mesh, the production of wire mesh involves the weaving of wire on industrial looms, leaving square or rectangular gaps between the wires.